This is an alarm mode that wakes you up with pleasant sounds and light.<\/p>\n\n\n\n
The alarm operates in two stages to help you wake up comfortably.<\/p>\n\n\n
Three minutes before the set wake-up time, a pleasant fade-in sound plays.<\/p>\n\n\n\n
Press the crown once during the fade-in sound to mute until the wake-up time; press and hold to turn off the alarm.<\/p>\n<\/div><\/div>\n\n\n\n
Fade-in sound is enabled by default. It can only be disabled via the app.<\/p>\n<\/div><\/div>\n\n\n
At the wake-up time, the dial lights up along with the alarm sound. Press the crown once during the alarm sound to snooze; press and hold to turn off the alarm.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n3<\/span><\/div><\/div>\n\n\nWhen snoozed, the dial remains on the alarm display but muted. The alarm sound resumes after 9 minutes. Press and hold the crown during snooze to turn off the alarm, the sun LED will turn off, and the clock display will appear.<\/p>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen the sun LED is lit, the alarm is ON.<\/p>\n<\/div><\/div>\n\n\n\nVolume Adjustment<\/h3>\n\n\n\nYou can adjust the volume by turning the crown while the alarm sound is playing. Turn clockwise to increase volume, counterclockwise to decrease.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nVolume cannot be adjusted on the device during fade-in sound. It can only be adjusted via the app.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h2>\n\n\n\nYou can set the alarm by following the steps below to set your wake-up time.<\/p>\n\n\n1<\/span><\/div><\/div>\n\n\nPress and hold the sun button while on the clock display or Relax Time mode. The sun LED on the front will slowly blink, indicating you have entered the setting mode.<\/p>\n\n\n\n<\/figure>\n\n\n2<\/span><\/div><\/div>\n\n\nTurn the crown to select the “hour,” then press the crown to confirm the hour.<\/p>\n\n\n\n<\/figure>\n\n\n\nIn AM, only the selected number blinks while others are off.In PM, only the selected number blinks while all others are lit.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nSet the wake-up time based on the 24-hour format.<\/p>\n<\/div><\/div>\n\n\n3<\/span><\/div><\/div>\n\n\nTurn the crown to select the “minutes” you want to wake up, then press the crown to set the alarm. The sun LED on the front will light up and return to the previous state.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe hourly chime will not sound when the alarm is set.<\/p>\n<\/div><\/div>\n\n\n\nCancel Alarm<\/h3>\n\n\n\nTo cancel the alarm, press and hold the sun button while on the clock display or Relax Time mode. When the alarm is canceled, the sun LED will turn off.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm<\/h2>\n\n\n\nYou can check the alarm time and alarm sound.<\/p>\n\n\n\nCheck Alarm Time<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button once will cause the sun LED on the front of the device to flash, allowing you to check the set alarm time.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm Sound<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button twice will cause the sun LED on the front of the device to flash, allowing you to check the alarm sound and alarm time. You can adjust the volume by turning the crown while checking.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\nAlarm Setting in App<\/h2>\n\n\n\nAlarm Preset<\/h3>\n\n\n\nIn the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
When snoozed, the dial remains on the alarm display but muted. The alarm sound resumes after 9 minutes. Press and hold the crown during snooze to turn off the alarm, the sun LED will turn off, and the clock display will appear.<\/p>\n\n\n\n
When the sun LED is lit, the alarm is ON.<\/p>\n<\/div><\/div>\n\n\n\n
You can adjust the volume by turning the crown while the alarm sound is playing. Turn clockwise to increase volume, counterclockwise to decrease.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nVolume cannot be adjusted on the device during fade-in sound. It can only be adjusted via the app.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h2>\n\n\n\nYou can set the alarm by following the steps below to set your wake-up time.<\/p>\n\n\n1<\/span><\/div><\/div>\n\n\nPress and hold the sun button while on the clock display or Relax Time mode. The sun LED on the front will slowly blink, indicating you have entered the setting mode.<\/p>\n\n\n\n<\/figure>\n\n\n2<\/span><\/div><\/div>\n\n\nTurn the crown to select the “hour,” then press the crown to confirm the hour.<\/p>\n\n\n\n<\/figure>\n\n\n\nIn AM, only the selected number blinks while others are off.In PM, only the selected number blinks while all others are lit.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nSet the wake-up time based on the 24-hour format.<\/p>\n<\/div><\/div>\n\n\n3<\/span><\/div><\/div>\n\n\nTurn the crown to select the “minutes” you want to wake up, then press the crown to set the alarm. The sun LED on the front will light up and return to the previous state.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe hourly chime will not sound when the alarm is set.<\/p>\n<\/div><\/div>\n\n\n\nCancel Alarm<\/h3>\n\n\n\nTo cancel the alarm, press and hold the sun button while on the clock display or Relax Time mode. When the alarm is canceled, the sun LED will turn off.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm<\/h2>\n\n\n\nYou can check the alarm time and alarm sound.<\/p>\n\n\n\nCheck Alarm Time<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button once will cause the sun LED on the front of the device to flash, allowing you to check the set alarm time.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm Sound<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button twice will cause the sun LED on the front of the device to flash, allowing you to check the alarm sound and alarm time. You can adjust the volume by turning the crown while checking.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\nAlarm Setting in App<\/h2>\n\n\n\nAlarm Preset<\/h3>\n\n\n\nIn the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Volume cannot be adjusted on the device during fade-in sound. It can only be adjusted via the app.<\/p>\n<\/div><\/div>\n\n\n\n
You can set the alarm by following the steps below to set your wake-up time.<\/p>\n\n\n
Press and hold the sun button while on the clock display or Relax Time mode. The sun LED on the front will slowly blink, indicating you have entered the setting mode.<\/p>\n\n\n\n<\/figure>\n\n\n2<\/span><\/div><\/div>\n\n\nTurn the crown to select the “hour,” then press the crown to confirm the hour.<\/p>\n\n\n\n<\/figure>\n\n\n\nIn AM, only the selected number blinks while others are off.In PM, only the selected number blinks while all others are lit.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nSet the wake-up time based on the 24-hour format.<\/p>\n<\/div><\/div>\n\n\n3<\/span><\/div><\/div>\n\n\nTurn the crown to select the “minutes” you want to wake up, then press the crown to set the alarm. The sun LED on the front will light up and return to the previous state.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe hourly chime will not sound when the alarm is set.<\/p>\n<\/div><\/div>\n\n\n\nCancel Alarm<\/h3>\n\n\n\nTo cancel the alarm, press and hold the sun button while on the clock display or Relax Time mode. When the alarm is canceled, the sun LED will turn off.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm<\/h2>\n\n\n\nYou can check the alarm time and alarm sound.<\/p>\n\n\n\nCheck Alarm Time<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button once will cause the sun LED on the front of the device to flash, allowing you to check the set alarm time.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm Sound<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button twice will cause the sun LED on the front of the device to flash, allowing you to check the alarm sound and alarm time. You can adjust the volume by turning the crown while checking.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\nAlarm Setting in App<\/h2>\n\n\n\nAlarm Preset<\/h3>\n\n\n\nIn the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Turn the crown to select the “hour,” then press the crown to confirm the hour.<\/p>\n\n\n\n<\/figure>\n\n\n\nIn AM, only the selected number blinks while others are off.In PM, only the selected number blinks while all others are lit.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nSet the wake-up time based on the 24-hour format.<\/p>\n<\/div><\/div>\n\n\n3<\/span><\/div><\/div>\n\n\nTurn the crown to select the “minutes” you want to wake up, then press the crown to set the alarm. The sun LED on the front will light up and return to the previous state.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe hourly chime will not sound when the alarm is set.<\/p>\n<\/div><\/div>\n\n\n\nCancel Alarm<\/h3>\n\n\n\nTo cancel the alarm, press and hold the sun button while on the clock display or Relax Time mode. When the alarm is canceled, the sun LED will turn off.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm<\/h2>\n\n\n\nYou can check the alarm time and alarm sound.<\/p>\n\n\n\nCheck Alarm Time<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button once will cause the sun LED on the front of the device to flash, allowing you to check the set alarm time.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm Sound<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button twice will cause the sun LED on the front of the device to flash, allowing you to check the alarm sound and alarm time. You can adjust the volume by turning the crown while checking.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\nAlarm Setting in App<\/h2>\n\n\n\nAlarm Preset<\/h3>\n\n\n\nIn the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
In AM, only the selected number blinks while others are off.In PM, only the selected number blinks while all others are lit.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nSet the wake-up time based on the 24-hour format.<\/p>\n<\/div><\/div>\n\n\n3<\/span><\/div><\/div>\n\n\nTurn the crown to select the “minutes” you want to wake up, then press the crown to set the alarm. The sun LED on the front will light up and return to the previous state.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe hourly chime will not sound when the alarm is set.<\/p>\n<\/div><\/div>\n\n\n\nCancel Alarm<\/h3>\n\n\n\nTo cancel the alarm, press and hold the sun button while on the clock display or Relax Time mode. When the alarm is canceled, the sun LED will turn off.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm<\/h2>\n\n\n\nYou can check the alarm time and alarm sound.<\/p>\n\n\n\nCheck Alarm Time<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button once will cause the sun LED on the front of the device to flash, allowing you to check the set alarm time.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm Sound<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button twice will cause the sun LED on the front of the device to flash, allowing you to check the alarm sound and alarm time. You can adjust the volume by turning the crown while checking.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\nAlarm Setting in App<\/h2>\n\n\n\nAlarm Preset<\/h3>\n\n\n\nIn the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Set the wake-up time based on the 24-hour format.<\/p>\n<\/div><\/div>\n\n\n
Turn the crown to select the “minutes” you want to wake up, then press the crown to set the alarm. The sun LED on the front will light up and return to the previous state.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe hourly chime will not sound when the alarm is set.<\/p>\n<\/div><\/div>\n\n\n\nCancel Alarm<\/h3>\n\n\n\nTo cancel the alarm, press and hold the sun button while on the clock display or Relax Time mode. When the alarm is canceled, the sun LED will turn off.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm<\/h2>\n\n\n\nYou can check the alarm time and alarm sound.<\/p>\n\n\n\nCheck Alarm Time<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button once will cause the sun LED on the front of the device to flash, allowing you to check the set alarm time.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm Sound<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button twice will cause the sun LED on the front of the device to flash, allowing you to check the alarm sound and alarm time. You can adjust the volume by turning the crown while checking.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\nAlarm Setting in App<\/h2>\n\n\n\nAlarm Preset<\/h3>\n\n\n\nIn the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
The hourly chime will not sound when the alarm is set.<\/p>\n<\/div><\/div>\n\n\n\n
To cancel the alarm, press and hold the sun button while on the clock display or Relax Time mode. When the alarm is canceled, the sun LED will turn off.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm<\/h2>\n\n\n\nYou can check the alarm time and alarm sound.<\/p>\n\n\n\nCheck Alarm Time<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button once will cause the sun LED on the front of the device to flash, allowing you to check the set alarm time.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm Sound<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button twice will cause the sun LED on the front of the device to flash, allowing you to check the alarm sound and alarm time. You can adjust the volume by turning the crown while checking.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\nAlarm Setting in App<\/h2>\n\n\n\nAlarm Preset<\/h3>\n\n\n\nIn the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
You can check the alarm time and alarm sound.<\/p>\n\n\n\n
When the clock is displayed, pressing the sun button once will cause the sun LED on the front of the device to flash, allowing you to check the set alarm time.<\/p>\n\n\n\n<\/figure>\n\n\n\nCheck Alarm Sound<\/h3>\n\n\n\nWhen the clock is displayed, pressing the sun button twice will cause the sun LED on the front of the device to flash, allowing you to check the alarm sound and alarm time. You can adjust the volume by turning the crown while checking.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\nAlarm Setting in App<\/h2>\n\n\n\nAlarm Preset<\/h3>\n\n\n\nIn the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
When the clock is displayed, pressing the sun button twice will cause the sun LED on the front of the device to flash, allowing you to check the alarm sound and alarm time. You can adjust the volume by turning the crown while checking.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nWhen checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\nAlarm Setting in App<\/h2>\n\n\n\nAlarm Preset<\/h3>\n\n\n\nIn the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
When checking the alarm time, the numbers light up in reverse for PM.Example: 8 PM – all numbers except 8 light up, and 8 blinks.<\/p>\n<\/div><\/div>\n\n\n\n
In the app, you can set up to three preset times and switch your wake-up time with a single tap. When a product is added, the alarm time set on the device is registered as the first preset.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nOnly one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\nSet\/Cancel Alarm<\/h3>\n\n\n\nTo toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Only one alarm time can be set on the device.<\/p>\n<\/div><\/div>\n\n\n\n
To toggle alarm setting\/cancellation in the app, tap the toggle to the right of the alarm. Orange means set, gray means canceled.<\/p>\n\n\n\n<\/figure>\n\n\n\nSound Settings<\/h3>\n\n\n\nAlarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Alarm sounds can only be selected from the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/mask><\/g><\/svg><\/div>\nThe default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\nFade-in Sound Setting\/Cancel<\/h3>\n\n\n\nFade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
The default setting is fade-in sound “Milan” and alarm sound “Alarm 1.”<\/p>\n<\/div><\/div>\n\n\n\n
Fade-in sound can be turned on\/off from the app.*Default setting: On<\/p>\n\n\n\n<\/figure>\n\n\n\nToggle Time Display<\/h3>\n\n\n\nYou can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
You can switch the alarm time display between 24-hour and 12-hour formats in the app.<\/p>\n\n\n\n<\/figure>\n\n\n\n<\/figure>\n\n\n\nSettings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Settings can be adjusted under “Account” in the “24-hour Display” section.<\/p>\n\n\n\n<\/figure>\n","protected":false},"excerpt":{"rendered":"About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
About the Alarm Function This is an alarm mode that wakes you up with pleasant sounds and light. Alarm Wake-Up\u2026<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":665,"menu_order":79,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_pgth2_h2_style":"decorated","_pgth2_toc_enabled":"default","sb_modal_display":false,"footnotes":""},"class_list":["post-923","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/comments?post=923"}],"version-history":[{"count":2,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions"}],"predecessor-version":[{"id":934,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/923\/revisions\/934"}],"up":[{"embeddable":true,"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/pages\/665"}],"wp:attachment":[{"href":"https:\/\/www.balmuda.com\/global\/connect-app\/wp-json\/wp\/v2\/media?parent=923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}